A) Standard H Point
Used to drive through glacial till. Protects the flange & web of the bearing pile from damage due to boulders etc.
POINT NO
HPP-S-14
HPP-S-12
HPP-S-10
HPP-S-8 |
TO SUIT “H” PILE
HP 14 (360) @ 117/102/89/73
HP 12 (310) @ 117/102/89/74/63/53
HP 10 (250) @ 57/42
HP 8 (200) @ 36 |
 |
B) HD Rock Injector for H-Piles
Recommended where the rock bed is dipping up to 50 degrees. The chisel-like point chips into the rock to prevent sliding and skipping.
Other types of driving shoes such as the Titus Standard point (above), Associated Pile and Fitting’ Pruyn point, the Hard Bite point and the Oslo point should not be used on bearing surfaces dipping more than 9 degrees due to eccentric bending moments.
POINT NO
HPP-R-14-HD
HPP-R-12-HD
HPP-R-10-HD
HPP-R-8-HD |
TO SUIT “H” PILE
HP 14 (360) @ 117/102/89/73
HP 12 (310) @ 117/102/89/74/63/53
HP 10 (250) @ 57/42
HP 8 (200) @ 36 |
 |
C) Open Cutting Shoe
Recommended for Pipe Piles to drive through glacial till.
Pile Point
PP147136
PP32311
PP32203
PP32203
PP31492
PP31179
PP31180
PP31181 |
OUTSIDE PIPE DIA.
10-3/4”
12-3/4”
16”
18”
20”
24”
30”
36” |
OUTSIDE PIPE DIA. “A”
11.00”
12.87”
16.12”
18.25”
20.25”
24.25”
30.25”
36.25” |
 |
D) HD Rock Injector for Pipe Piles
Recommended where Pipe piles are being driven into sloping rock at 12 degrees or more … Or when pile will be filled with cement.
PILE POINT
SK-1309
SK-6140
SK-1217
SK-1213
SK-8332
SK-1222
SK-1320 |
TO SUIT OUTSIDE PIPE DIAMETER
8-5/8”
9-5/8”
10-3/4”
12-3/4”
14”
20”
24” |
 |
Also Available: Splicers And Timber Pile Points |
