Dynamic Armor Plate
North American Toll-Free - 1-866-212-2348 Direct line for Dynamic Armor Plate
*click on images to expand
| Threat | Distance (m) | Obliquity | mm | inch |
| .357 Magnum FMJ | 5 | 0 | 3 | 0.125 |
| .44 Magnum FMJ | 5 | 0 | 4 | 0.157 |
| 7.62mm PS x 39 M43 | 10 | 0 | 4 | 0.157 |
| 5.56mm SS109 (M855) x 45 | 10 | 0 | 6.5 | 0.257 |
| 5.56mm SS92 (M193) x 45 | 10 | 0 | 10 | 0.393 |
| 7.62mm ordinary x 51 | 10 | 0 | 6.3 | 0.250 |
| (.30 ball x 51) | 100 | 0 | 6.3 | 0.250 |
| 7.62mm P80 x 51 | 30 | 0 | 15.8 | 0.625 |
| (.30 AP x 51) | 30 | 30 | 12.7 | 0.50 |
| 100 | 30 | 12.7 | 0.50 | |
| 100 | 45 | 12.7 | 0.50 |
Dynamic Armor is not produced to a military standard. Dynamic Armor has been successfully tested against the firing
requirements of various ballistic standards on a heat lot per thickness basis.
Ballistic tests are performed by 3rd party testing facility.
The chart above should be used as a guide to material selection, but in no way guarantees steel performance in these conditions.
Ballistic tests are performed by 3rd party testing facility.
The chart above should be used as a guide to material selection, but in no way guarantees steel performance in these conditions.
"Notice: Due to the wide variety of projectiles and the fact that ballistic performance is not a quantitive science, Dynamic Armor makes no guarantee or warranties as to the ballistic capabilities of Dynamic Armor plate. Dynamic Armor personnel will provide mill certificates and the independent 3rd party ballisctic test results, on a heat lot basis, to demonstrate the typoical ballistic performance against various ballistic standards, which can be used as a guide in material selection"
